Brake Pads for BYD Dolphin & Seal — The Complete Guide
The short answer: thanks to regenerative braking, brake pads on the Dolphin and Seal last a very long time (sometimes 80,000 km+). But that's exactly what causes the problem: pads that don't work = rusty discs and seized calipers. Here's how to maintain them properly.
⚡ How braking works in an EV
When you press the brake, the system first converts braking energy into electricity (regen) — and only then applies the mechanical brakes. The real-world result:
- Pads barely touch the discs in normal driving — so they last for years.
- But: when they do touch (hard braking, rain, parking) — the discs are cold and dirty, and wear can be uneven.
- The hydraulic brake must still work — it's required by law and safety, and regen alone doesn't stop the car within the required distance.
📅 When you actually need to replace
| Component | Typical life on Dolphin/Seal | When to check |
|---|---|---|
| Front pads | 60,000–100,000 km | Visual check at every service |
| Rear pads | Similar — depends on regen usage | Check at every service |
| Discs | Usually two pad sets and beyond | Check grooves and corrosion |
| Brake fluid | Every 2 years per manufacturer | Moisture level test |
Don't rely on mileage alone: a car that sits for long periods (or only drives in the city) can show little wear — but rusty discs and a seized caliper. The annual inspection matters more than "the number of km".
Verified from the shelf (August 2026): pads for the BYD Dolphin are in stock under ADP2214 by Danaher (reference numbers: D2645 / 1343650600) — the same kit also fits the BYD Qin in the Chinese market. For the Seal — still per VIN.
🧾 Which part fits
The Dolphin and Seal share the BYD e-Platform 3.0 — but their parts aren't necessarily identical. What to know:
- The right number is determined by: model + production year + (ideally) VIN. Different facelifts can take different pads.
- Pad kit: usually comes with clips and/or a wear sensor — make sure the kit includes them.
- Replacement brands: major manufacturers already offer fitments for the Dolphin and Seal — verify the fitment in the catalog with the VIN, not just by model name.
- Warning: cheap "fitments" with no basis keep appearing in the market. Pads are a safety item — buy from a known brand with warranty.
Need an exact OEM number? Send us the model, production year and VIN — dcar.official.il@gmail.com — and we'll verify the part in the catalog. Soon this will be fully automatic in our free tool.
⚠️ The traps — including the electric rear caliper
- Electric rear caliper (EPB): the Seal (and some Dolphin facelifts) has an electrically operated parking brake. Manual release with a tool damages the caliper motor — a service mode via the car's menu or a scan tool is mandatory.
- Disc corrosion: after rain or long parking — a rust layer on the discs. Check that vibrations disappear after several hard brakes; if not — skim or replace.
- Squeals after replacement: usually improper lubrication or missing clips. In an EV, a persistent squeal = something is wrong — don't get used to it.
- "The car brakes by itself" (auto-hold): the function applies the mechanical brakes even when stopped — frequent use accelerates rear pad wear.
✅ Workshop checklist
- Visual check of front and rear pad thickness (even at low mileage).
- Caliper check: free movement, dust boots, signs of leakage.
- Disc check: grooves, rust, thickness.
- Brake fluid check (moisture level).
- If replacing rears — EPB service mode before disassembly.
Bottom line: brakes on the Dolphin and Seal are "maintenance by inspection, not by mileage". One small annual inspection saves an expensive disc-and-caliper replacement. And when it's time — order with a VIN.
🛒 Where to buy these parts
Most parts in this guide can be ordered online. Before ordering, verify fitment by VIN + model year (engines and generations differ!).
Some links include a commission — at no extra cost to you. We don't sell parts; we help you find them.