Wheel hub bearing MG ZS — Part number EBH2108
MG ZS · 2019+ · EBI
This site is field knowledge, not a substitute for a workshop inspection or manufacturer confirmation. Always confirm the part number by VIN before buying.
Part details
What it actually is
The hub connects the wheel to the car and houses the bearing that lets it spin. On a heavy Chinese car with large tyres and rough roads, it is one of the first points to start making noise.
Signs it needs replacing
- Hum that rises with speed and changes in turns
- Noise that increases turning left or right (tells you the side)
- Play in the wheel when lifted
- Uneven braking or an ABS light that comes and goes
How often
No fixed interval — replace on noise. Manual check at every service.
OEM vs aftermarket
A hub is a safety part. Aftermarket units (EBI, Loren) are common and work, but must match diameter, bolt count and ABS sensor position. A mistake here is not discomfort — it is a wheel coming off.
Exact fitment
| Fits model | Years | Engine | Part number |
|---|---|---|---|
| MG ZS | 2019+ | — | EBH2108 |
This site is field knowledge, not a substitute for a workshop inspection or manufacturer confirmation. Always confirm the part number by VIN before buying. VIN
Related parts for this model
FAQ
Can a hub be replaced without a press?
The bearing comes sealed and pre-fitted, so no press is needed. What you do need is the exact torque spec — not 'tight'.
Can a tyre cause wheel noise?
Yes, and it is the first thing to rule out. Swap the wheel side to side: if the noise moved, it is the tyre; if it stayed, it is the hub.