MG ZS suspension and shock absorbers
The short answer: The ZS carries a lot of weight on its front suspension, and that is what wears first. Every verified suspension number we hold is on this page.
Where the numbers come from: All 5 part numbers on this page were photographed from physical packaging at the shop and cross-checked. Nothing here is invented; if a number is missing, it is not listed.
Verified part numbers
| Part | Part no. | Fits |
|---|---|---|
| Suspension part | LAS4111 | ZS · from 2023 |
| Suspension part | LCA9307 | ZS |
| Suspension part | LCA9308 | ZS |
| Suspension part | LTR3159 | ZS |
| Suspension part | LTR3160 | ZS |
What to know before ordering
- A knock over speed bumps is usually an anti-roll bush or a top mount, not a dead shock.
- A shock that is weeping oil is finished even if it does not bounce yet.
- Replace shocks in pairs per axle, or the car will be unstable under braking.
- After any front suspension work an alignment is mandatory.
Common mistake: replacing shocks to cure a noise that is not coming from them. Spring noise can be a mount, a link or a bush.
How to verify fitment by VIN
Three parameters decide whether a part fits: model year, engine or powertrain code and the VIN. On a Chinese car the VIN also encodes the build year and plant.
- Find the VIN on the windscreen plate or the registration document.
- Compare the first 8 characters (WMI + model) between two cars; they identify the platform.
- If in doubt, send a photo of the old packaging or the plate; it is the most reliable input.
Full guide to reading a Chinese car VIN →
🛒 Where to buy these parts
Most parts in this guide can be ordered online. Before ordering, verify fitment by VIN + model year (engines and generations differ!).
Some links include a commission — at no extra cost to you. We don't sell parts; we help you find them.