MG ZS wheel hubs and bearings
The short answer: A hum that rises with speed and changes in a turn is a bearing. These are the verified hub numbers we hold for the MG ZS.
Where the numbers come from: All 7 part numbers on this page were photographed from physical packaging at the shop and cross-checked. Nothing here is invented; if a number is missing, it is not listed.
Verified part numbers
| Part | Part no. | Fits |
|---|---|---|
| Hub bearing | EB5096ABS | ZS · from 2018 |
| Hub bearing | EBH2108 | ZS · from 2019 |
| Hub bearing | EBH2488 | ZS · from 2018 |
| Hub bearing | EBH2617 | ZS · from 2020 |
| Hub bearing | EBH2623 | ZS · from 2023 |
| Hub bearing | EBH3074 | ZS · from 2019 |
| Hub bearing | RD01273 | ZS · from 2023 |
What to know before ordering
- A hum that gets louder turning right means a bearing on the left, where the load moves.
- A complete hub usually ships with the bearing and the ABS sensor — check what is included.
- On high mileage, replace both sides of the same axle.
- Torque to spec on refitting; an impact gun on the axle nut kills a new bearing.
Common mistake: replacing the bearing without checking the tyre. A tyre with stepped wear makes exactly the same noise.
How to verify fitment by VIN
Three parameters decide whether a part fits: model year, engine or powertrain code and the VIN. On a Chinese car the VIN also encodes the build year and plant.
- Find the VIN on the windscreen plate or the registration document.
- Compare the first 8 characters (WMI + model) between two cars; they identify the platform.
- If in doubt, send a photo of the old packaging or the plate; it is the most reliable input.
Full guide to reading a Chinese car VIN →
🛒 Where to buy these parts
Most parts in this guide can be ordered online. Before ordering, verify fitment by VIN + model year (engines and generations differ!).
Some links include a commission — at no extra cost to you. We don't sell parts; we help you find them.