BYD Atto 3 wheel hubs and bearings
The short answer: On the Atto 3 the hub is a complete unit with the bearing and the ABS sensor. These are the verified numbers for front and rear, genuine and aftermarket.
Where the numbers come from: All 4 part numbers on this page were photographed from physical packaging at the shop and cross-checked. Nothing here is invented; if a number is missing, it is not listed.
Verified part numbers
| Part | Part no. | Fits |
|---|---|---|
| Front wheel hub (Genuine) | 13423446-00 | Atto 3 · 2022–2026 |
| Front wheel hub — EBI | EBH31470 | Atto 3 · 2022–2026 |
| Rear wheel hub (Genuine) | 12987652-00 | Atto 3 · 2022–2026 |
| Rear wheel hub — EBI | EBH31472 | Atto 3 · 2022–2026 |
What to know before ordering
- A hum that rises with speed is the first sign, not vibration.
- Check whether the hub includes the ABS sensor; if not, the old one has to be transferred.
- Axle nut torque is critical: too tight kills a new bearing, too loose creates play.
- After fitting, check the ABS and have the alignment confirmed.
Common mistake: Replacing a hub for a noise that is actually the tyre. Stepped tyre wear makes the same hum, so check it first.
How to verify fitment by VIN
Three parameters decide whether a part fits: model year, engine or powertrain code and the VIN. On a Chinese car the VIN also encodes the build year and plant.
- Find the VIN on the windscreen plate or the registration document.
- Compare the first 8 characters (WMI + model) between two cars; they identify the platform.
- If in doubt, send a photo of the old packaging or the plate; it is the most reliable input.
Full guide to reading a Chinese car VIN →
🛒 Where to buy these parts
Most parts in this guide can be ordered online. Before ordering, verify fitment by VIN + model year (engines and generations differ!).
Some links include a commission — at no extra cost to you. We don't sell parts; we help you find them.